LED Ceiling Lights Manufacturer & Wholesale Supplier
Flush mounts, slim panels and surface-mounted luminaires engineered for distributors who need stable specs and predictable landed cost.
Every Ceiling Lights model.
Open a product for the full technical file, or filter the matrix below. Custom wattage, finish and driver brand on request.
The numbers behind the range.
Full test reports, IES/LDT files and 3D models are available for every configuration. Sample lead time from stock is usually 3–7 days.
| Model | Power | Size | Material | CRI / IP | |
|---|---|---|---|---|---|
| PL-CL-2401 | 24W | Ø400×H90mm | Aluminium + PC | CRI 90 / IP20 | Inquire |
| PL-CL-2402 | 36W | 600×600×H32mm | Aluminium frame | CRI 90 / IP44 | Inquire |
| PL-CL-2403 | 48W | Ø800×H120mm | Steel + brass ring | CRI 95 / IP20 | Inquire |
| PL-CL-2404 | 18W | Ø300×H75mm | Aluminium + glass | CRI 90 / IP44 | Inquire |
| PL-CL-2405 | 60W | Ø1000×H140mm | Iron + acrylic | CRI 95 / IP20 | Inquire |
| PL-CL-2406 | 12W | Ø220×H60mm | ABS + PC | CRI 85 / IP54 | Inquire |
Fewer surprises at handover.
The difference between a good sample and a good project is documentation. We supply both.
Drivers you can service
Not a grey box. Driver model, wattage and replacement part number are printed inside every housing — installers can source a replacement locally years from now.
Photometrics before you commit
IES / LDT files, LM-79 reports and recommended spacings are shared before the deposit, so the lighting designer signs off on the fixture instead of discovering it on site.
Finish files that match the spec
RAL, anodized or plating references are written into the production order — the batch you receive matches the sample you approved.
Continue through the collection
Questions buyers ask about this range
What is the minimum order for ceiling lights?
There is no single figure. Each model has a quotation point — the quantity at which tooling, plating and packing setup become viable. Ceiling fixtures usually reach it at a lower unit count than small wall lights because the unit value is higher. Mixed models in one order bring each closer to its point.
Which CCT and CRI should I order for a hotel?
3000K at CRI 90 is the hotel default: warm enough for guest areas, neutral enough for corridors. 2700K suits residential and restaurant, 4000K belongs in back-of-house. Mixing CCT across one floor is the most common specification error we see.
What happens when a driver fails in year three?
The driver model, wattage and replacement part number are printed inside every housing, so an installer can source the same driver locally instead of replacing the whole fitting. Drivers are serviceable from below without removing the ceiling plate.
How long is delivery?
Samples from stock in 3–7 days. Production 25–35 days after deposit and artwork approval. Sea freight to Santos, Jebel Ali or Ho Chi Minh City is typically 30–38 days.
Can I order a custom finish or my logo?
Yes. RAL-matched finishes and laser logos follow the standard model's MOQ, and the exact quantity is confirmed with the quotation.
Are the ceiling lights dimmable?
Selected models support trailing-edge or 0–10V dimming depending on the driver specified. Tell us the dimming protocol of your project and we match the driver before quoting.
A common starting point in this range is the Aurora Round Flush Mount. If you need a different size, finish or driver, it is built on the same platform — see how custom runs work.
Need a variant of the Ceiling Lights family?
Different diameter, wattage, CCT, dimming protocol or finish — we tool from your drawing, or adapt a MOQ line item for pre-launch changes.