Indoor & Outdoor LED Wall Lights
Up-down sconces, wall washers and bedside luminaires — high-margin add-on SKUs that ship alongside your ceiling and pendant orders.
Every Wall Lights model.
Open a product for the full technical file, or filter the matrix below. Custom wattage, finish and driver brand on request.
The numbers behind the range.
Full test reports, IES/LDT files and 3D models are available for every configuration. Sample lead time from stock is usually 3–7 days.
| Model | Power | Size | Material | CRI / IP | |
|---|---|---|---|---|---|
| PL-WL-4401 | 12W | Ø60×H300mm | Aluminium + PC | CRI 90 / IP54 | Inquire |
| PL-WL-4402 | G9 max 25W | W220×H160mm | Alabaster + brass | CRI 90 / IP20 | Inquire |
| PL-WL-4403 | 18W | H450×W60mm | Aluminium + acrylic | CRI 95 / IP65 | Inquire |
| PL-WL-4404 | 6W | Ø180×H90mm | Iron + fabric shade | CRI 85 / IP20 | Inquire |
Fewer surprises at handover.
The difference between a good sample and a good project is documentation. We supply both.
Drivers you can service
Not a grey box. Driver model, wattage and replacement part number are printed inside every housing — installers can source a replacement locally years from now.
Photometrics before you commit
IES / LDT files, LM-79 reports and recommended spacings are shared before the deposit, so the lighting designer signs off on the fixture instead of discovering it on site.
Finish files that match the spec
RAL, anodized or plating references are written into the production order — the batch you receive matches the sample you approved.
Continue through the collection
Questions buyers ask about this range
Do I need IP65 wall lights?
For covered terraces open to wind-driven rain, pool surrounds, facades and any site within a few kilometres of salt water, yes. Indoor IP20 fixtures in those positions corrode at the seal within about two seasons.
Up-down or down-only?
Up-down throws a wash up the wall and a pool below, which reads as architectural and is safer on a 2.7–3.2 m wall. Down-only is sharper and more efficient but needs a taller wall or it looks like it cuts the wall in half.
At what height should wall lights be mounted?
1.8–2.0 m to the centre in corridors, 1.6–1.8 m in restaurant alcoves, 1.7–1.9 m either side of a bathroom mirror, 2.2–2.6 m on facades. Measure to the centre of the fixture.
Can the finish match a RAL colour?
Yes on custom runs. Custom finish becomes a batch item, which moves the quotation point. Send the RAL reference with the order rather than after the deposit.
What is the MOQ for wall lights?
MOQ depends on design. Standard items support low-volume trial orders, and mixed loading is available with your ceiling or pendant orders.
Can wall lights be installed in bathrooms?
Bathroom zones need IP44 or higher and, in some markets, a Class II driver. Our IP54 sconce suits wet zones outside direct spray; always confirm your local code before specifying.
A common starting point in this range is the Cylinder Up-Down Sconce. If you need a different size, finish or driver, it is built on the same platform — see how custom runs work.
Need a variant of the Wall Lights family?
Different diameter, wattage, CCT, dimming protocol or finish — we tool from your drawing, or adapt a MOQ line item for pre-launch changes.